- Stone Experiment
- what 1000 grit stone should I get now
- Leveling waterstones
- Sharpen antique cleavers? Bwahahahaha
- Knife Sharpening!
- DMT & Silicon Carbide?
- sharpening steel for japanese knives
- My nenox suji developed a birds beak!
- Need help maintaining Santoku but I am afraid to sharpen.
- Which 1000 grit waterstone for me? Bester or Sigma ??
- jumping between stones
- Gesshin 8K
- Gesshin 2K
- What NOT to do... Grand Cheff Edition
- Advice on Ice Bear waterstones
- Thinning advice?
- Norton Grit size confusion
- An acquaintence of mine has some J-Nats...what are they?
- How to catch a burr in 30 seconds?
- Diamond bench "stones".
- Good elbow grease after bad
- Using the rough side of leather strops
- What is a good stone to end with on Edge Pro?
- Chosera 1k or EP1k?
- Flitz for stropping works great
- Initial Edge Pro results and help
- After 1k Stone
- Difference sharpening: Dave Martell and Murray Carter?
- Favorite stone
- Single bevels on Gyuto's
- The sharpening stones on jki
- Sharpening lesson/fixing chip
- Need Help sharpening a curved blade on an Edge Pro.
- DMT and Usuba
- Peculiar transmutation
- Advanced Sharpening : Blade Asymmetry
- Advanced Knife Sharpening Techniques : Following Curves
- Cutting on the grill
- Got an edge pro, now want to strop
- Sharpening single bevel or asymmetrical?
- Ok, having so much fun with my EP I decided to try some freehanding
- Nubatama Stones - user feedback?
- Chosera 5k for Edge Pro initial impression
- Big Variable Speed Motor for a Belt Grinder
- New diamond stone
- kbar neck knife done with nubatama
- US-Products abrasives
- Deba Sharpening
- Sigma Power Select II 1200
- Sorted My Sharpening Gear
- Advice on natural stones...
- Stone shortage
- To who ever emailed my work about stones!
- Need help selecting my next japanese waterstone
- Natural Stones and other abrasives (are grits just grits?)
- How are micro bevels used?
- Arashiyama a soaker?
- DMT lapping plate & EP stones
- Opening up the Carbonext
- Edge Pro - Best Painter's Tape or Alternative?
- For thinning and stone flattening...DMT or Atoma?
- Yamaguchi-San's tip trick
- I don't always get mirror bevels...
- How often do you practice getting better at sharpening?
- Chip Repair with EdgePro
- Seeking some advice on 2 stone setup
- Believe It Or Not - Shapton Glass
- The Oft-Critiqued Sharpening Study of 2004
- Sharpening scraper
- 60/40 Japanese Blades and what works ...
- Best CURRENT 6K-8K equiv (JNS) and Source
- A Bit Urgent .... Most likely JIS equiv grit range for Atagoyama thick stone ??
- French asymmetry
- Cuticule
- Advanced Sharpening techniques: Coote 3HP Belt Grinder: Knife Thinning ...
- Stone ID
- New Edge....
- Has/does anybody use a belt grinder to thin?
- Better Visuals
- Knife Sharpening Technique Playlist-Japanese Knife Imports
- European sharpener(d)s
- New medium brick
- Need advice on Edge pro and Edge Maintanence
- King = Ice Bear?
- boride abrasive stones for edge pro
- Naniwa "Snow White" 8k
- Just Sharpened a Batch
- Spyderco
- Go-To Touchup Stone(s) for Broad range of Blades
- Ned stone recommendation
- Stone Wear
- Knife Sharpening Playlist etc
- Supercharged JNAT Straight Razor Edge
- Fool-proof bevels for Kasumi SS 3" Paring
- Custom M390 Folder Mirror Finish